Stone Look Porcelain Tile
- Stone look porcelain tiles
- 423
- Price per sq ft
- $2.05 to $48.75
- Rectified edges
- 353
- Samples
- $4.99
Sizes compared
From our 423 stone look porcelain tiles. Prices are per sq ft.
| Size (in) | Tiles | From | Typical |
|---|---|---|---|
| 24x48 | 137 | $3.55 | $9.95 |
| 12x24 | 97 | $2.05 | $7.55 |
| 48x48 | 45 | $9.95 | $11.95 |
| 24x24 | 32 | $5.95 | $8.40 |
| 2x2 | 11 | $10.05 | $40.05 |
| 32x32 | 9 | $2.05 | $5.85 |
| 16x32 | 9 | $4.95 | $7.55 |
| 18x36 | 8 | $2.05 | $5.95 |
How to choose stone look porcelain tile
Judge stone-look porcelain on realism first, then on where it can go.
Count the faces. Each series is printed from a set number of different graphics, called faces. More faces means fewer obvious repeats; a few faces across a large room produce the same mark every few tiles. Check the face count where the product lists it, and lay out a full box before installing so you can shuffle twins apart.
Match the texture to the stone. A slate look should have a cleft, uneven surface you can feel; a travertine look should show soft pits or a tumbled edge; a limestone look is usually honed and flat. A flat print of a rough stone gives itself away in raking light.
Check the edge. A rectified edge lets the joint shrink to 1/16 in, which reads like cut stone. Cushion-edge (pressed) tile wants a joint of 1/8 in or wider and looks more rustic.
Decide indoor or outdoor. Only a frost-resistant tile should go outside where it freezes, and wet steps and patios call for a textured finish with a stated exterior wet-use rating. Some series also come as a thicker paver; compare options in outdoor tile and pavers.
Compare honestly. If you want true variation and are happy to seal, look at real natural stone tile. If the look you want is veined white marble rather than rugged stone, see marble-look porcelain.
Questions
Is stone look tile cheaper than real stone?
Often, though not always, and the bigger saving is upkeep. Stone-look porcelain here costs $2.05-$48.75 per sq ft, and none of it needs sealer, special stone cleaners or resealing. Real stone also loses more tile to culls and color sorting. Compare the installed cost, including sealing and setting materials, rather than the tile price alone.
Does stone look tile look real?
The better ones do from standing height, especially when the series has many faces and a texture that matches the stone. Up close, printed porcelain shows its hand through repeats, perfectly even thickness and edges that do not match the surface. Lay out a full box before installing and keep identical tiles apart to get the most natural result.
What grout color should I use with stone look tile?
Match the tile's middle tone, or go one shade darker. Real stone floors are usually set with grout that blends, so a matching color reads as stone, while stark white or black grout turns the floor into a grid. For slate looks pick charcoal or dark gray; for travertine and limestone looks, sand, beige or warm gray.
Can stone look porcelain go outdoors?
Yes, if the tile is frost-resistant and has a textured surface for grip. In a freezing climate, the spec must show ASTM C1026 frost resistance, and for wet patios and steps, check the stated exterior wet-use rating. If the series offers a 20 mm paver, that version can be dry-laid on a sand-and-gravel bed; regular-thickness tile has to be bonded to a concrete slab with thinset.
Does stone look tile need sealing?
No, not the tile. Skipping sealer is a big part of why buyers pick porcelain over real stone. Cement-based grout is still porous, so sealing the grout lines helps on floors and in showers. Epoxy grout skips that step entirely, at a higher material cost.
What sizes does stone look porcelain tile come in?
The most common sizes here are 24x48 (137), 12x24 (97), 48x48 (45), 24x24 (32), 2x2 (11) and 32x32 (9) inches. Thickness runs from 7.4 to 12 mm. Larger formats mean fewer grout lines but need a flatter floor; small formats and mosaics follow curves and shower slopes.
Which finishes are available in stone look porcelain tile?
Matte (306), Textured (52), Polished (36), Lappato (19) and Glossy (4). Matte hides water spots and is the usual pick for floors; textured gives extra grip outdoors and in wet areas; polished reflects light but is slippery when wet, so keep it to walls and dry floors; glossy brightens small spaces and wipes clean on walls.
How is stone look porcelain tile sold?
387 by the box, 32 by the sheet and 4 by the piece. Boxes cover 5.15 to 32 sq ft each. Most products have a minimum order of 5 boxes, sheets or pieces (about 300 lb); the product page shows the exact minimum and the calculator applies it.